Chi tiết sản phẩm

Máy cắt khoan 2 đầu tự động HH-RTC-10A

Mã sản phẩm : HH-RTC-10A
Giá : Liên hệ
Mô tả : Máy cắt khoan 2 đầu tự động HH-RTC-10A

1. Effective size:

Min Length:150mm
Max Length:1200mm
Min Width:40mm
Max Width:150mm
Min Depth:16mm
Max Depth:40mm

 

The equipment is equipped  with: 
Safety fence and open mortar of the diaphragm between the protective cover.
A return conveyor system for feeding the workpiece back to the device feed end,
In this way, the operator can manually receive and stack in one piece.

 

2. Capacity: about 6~12 piece / min.

 

3. Structure:
Heavy steel structure body, double-ended structure, one end for the fixed end, the other end can be moved. Both ends support a total of eight processing groups,
4 pcs are installed on the right and 4 pcs on the left.
Each machining area is equipped with a workpiece pressing cylinder.
The Max. opening and closing width of the equipment is 1600mm.

 

4. Equipment for P.L.C control, features include:
Positioning of the mobile end. Error self diagnosis. Processing group start. Processing of workpiece count. Production speed.
This equipment is suitable for precision straightening of straight parts, perforation, open tenon, glue and the installation of round bar tenon.

 

Auto. feeding system:
Stacking automatic feeding, can be used for flat workpiece automatic feeding。

 

Auto. feeding system effective size:
Min Length:150mm
Max Length:1600mm
Min Width:38mm
Max Width:150mm
Min Depth:16mm
Max Depth:40mm

 

 

Equipment with head instructions are as follows:

Head 1: 2:
Two vertical sawing processing groups, one at the fixed end and one at the moving end. For precision fixed length.
Main saw: 3HP, 2800rpm / 5000rpm frequency control
Main saw the max. dia. : 250mm
These machining groups operate on precision rails and are precisely cut.

 

Head 3,4:
Horizontal drilling group, model "03UFL", one located on the mobile side.
MOTOR: 2HP, 3000rpm / 5000rpm frequency control
The drill bags provided on each group are replaceable and can be rotated 360 degrees.
Each group with drilling Tsui 3, drill hole spacing of 32mm
These drill processing groups operate on rails, faster, with precise drilling, vertical and vertical directions.
The stroke limit device controls the drilling depth.

Head 5,6,7,8:
Four dowels, two at the fixed end and two on the moving end. For precision fixed length.
Main saw: 7.5HP, 3000rpm / 6000rpm speed control
Installation tool size: Dia. 40mm, 90mm(L)
These machining units are operated on precision rails and are manually adjustable in both horizontal and vertical directions.

 

Nose 9,10:
One rounded tenon machining group, one at the fixed end and one at the moving end. Each group is equipped with three adjustable injectors.
Min. center distance: 16mm
Max. center distance: 150mm
Each group is equipped with a vibrating tank
2 cans, one for glue, one for tenon.
Machinable diameter 6 and 8mm round bar tenon.

 

Bình luận
Next đối tác Prev đối tác

Hỗ trợ trực tuyến

Hỗ trợ
Ms Nguyệt
0903 181 373
Mr Trí
0938 840 306